Electromagnetic Compatibility Directive
Table of Contents
- The Directive: EMC 2014/30/EU
- Path to EU Market Entry
- Authorized Representative
- Post-Market Surveillance
- Risks of Non-Compliance
The EMC Directive 2014/30/EU applies to a vast range of equipment encompassing electrical and electronic appliances, systems and installations. This Directive covers products which are new to the Union market when they are placed on the market, as well and it applies to all forms of supply, including distance selling, as well.
The Directive 2014/30/EU applies to:
- Electrical and electronic appliances, systems, and installations including electrical and electronic appliances;
- Fixed installations;
- Devices and sub assemblies intended to be included in an apparatus by the end user and mobile installations.
This directive shall not apply to:
- Equipment covered by the Radio and telecommunication terminal directive (R&TTE) and Radio Equipment Directive (RED);
- Radio equipment used by radio amateurs;
- Equipment where EMC is covered by other specific directives, such as marine equipment if covered by Directive 96/98/EC or active implantable medical devices under the 90/385/EEC Directive;
- Aeronautical products;
- Equipment incapable of generating or contributing to electromagnetic emissions and/or operates without unacceptable degradation in the presence of electromagnetic disturbance as normally seen in its intended use;
- Custom built evaluation kits destined for professionals to be used solely at research and development facilities for such purposes.
The Directive: EMC 2014/30/EU
The EMC Directive 2014/30/EU (Electromagnetic Compatibility Directive) of the European Parliament and of the Council was published on March 29, 2014 in the Official Journal of the European Union, L 96/79, and replaced Directive 2004/108/EC on the 18th April 2014.
The EMC Directive 2014/30/EU regulates the electromagnetic compatibility of equipment – apparatus and fixed installations.
In order to achieve this objective, equipment need to comply with the essential requirements of the EMC Directive when it is placed on the market and/or put into service. The requirements limit electromagnetic emissions to a level that will not affect radio and telecommunications or other equipment and require products to have immunity to electromagnetic disturbances.
The EMC Directive does not regulate the safety of equipment in respect of people, domestic animals or property, therefore, it is not a safety related Directive.
Functional safety aspects based on electromagnetic disturbances are regulated for instance by the Machinery Directive 2006/42/EC, the Low Voltage Directive 2014/35/EU and the General Product Safety Directive 2001/95/EC.
- Chapter 1: General provision – Article 1-6
- Chapter 2: Obligation of economic operators – Article 1-12
- Chapter 3: Conformity of equipment – Article 13-19
- Chapter 4: Notification of conformity assessment bodies – Article 20- 36
- Chapter 5: Union market surveillance and control of apparatus entering the Union market ad Union safeguard procedure – Article 37-40
- Chapter 6: Committee, Transitional ad final provisions – Article 41- 47
- Annex I: Essential requirements
- Annex II: Module A: Internal production control
- Annex III: Part A – Module B: EU-type examination; Part B – Module C: conformity to type based on internal production control
- Annex IV: EU declaration of conformity
- Annex V: Time-limit for transposition into national law and date of application
- Annex VI: Correlation table
Path to EU Market Entry
There are two potential paths that a manufacturer may elect to follow before making their products available on the EU Market.
Conformity Assessment Procedure
- Internal Production Control
2. Conformity to type based on internal production control + EU-type Examination (Annex III)
It must be prepared by the manufacturer and shall include an adequate analysis and assessment of the risk(s). The technical documentation shall be drafted up according to the conformity assessment procedure followed by the manufacturer.
Essential requirements for all equipment
Equipment shall be so designed and manufactured as to ensure that:
- The electromagnetic disturbance generated does not exceed the level above which radio and telecommunications equipment or other equipment cannot operate as intended;
- It has a level of immunity to the electromagnetic disturbance to be expected in its intended use which allows it to operate without unacceptable degradation of its intended use.
Specific requirements for fixed installations
Fixed installations shall be installed applying good engineering practices and respecting the information on the intended use of its components.
At the discretion of the manufacturer, an Authorized Representative may be appointed by written mandate to undertake such activities as:
- Keeping the Declaration of Conformity and the technical documentation available to the national market surveillance authorities at all times and for 10 years after the product has been placed on the market,
- Accommodate any reasoned requests from the national Competent Authorities relating the documentation or conformity of the product,
- Cooperate with the national Competent Authorities regarding and actions to be taken to eliminate and risks related to the product for which they are responsible under the EAR written mandate.
The Authorized Representative should be clearly identified on the packaging to ensure efficient communication between end-users, Competent Authorities, economic operators with regard to the product(s) compliance.
It is the responsibility of the manufacturer to continue to collect information related to use of their products after they have been made available to consumers as well as to ensure that they continue to be compliant as the legislation applicable to their products evolves.
Post-Marketing surveillance activities include, but are not limited to:
- Staying up-to-date on new requirements or legislative changes,
- Continual updating of the technical file as modifications are made to the product,
- Reporting of any incidents related to the product use,
- Removal of non-compliant batches from EU economics operators and end-user,
- Keeping technical file available for 10 years after the last batch entered the EU market.
Working with a professional Authorized Representative will help to ensure that the necessary actions are taken to ensure continued compliance and proper post-market surveillance.
Risks of Non-Compliance
Non-compliant products enter the EU Market everyday - whether manufacturer knowingly does so or due to a lack of control from the EU importer/distributor on the compliance requirements of products.
Each Competent Authorities of Member State focus on conducting systematic surveillance of products which are being made available on the market. This can include pulling products off of shelves, stopping products at customs or even deploying bots online to identify non-EU based e-commerce shops which mention that they ship to the EU Market.
In the case that a product is found to be non-complaint, the main consequences include, but are not limited to:
- Being publicly reported to the RAPEX,
- Warehousing Fees,
- Requested Withdrawal,
- Mandated Withdrawal,
- Product Recall (from end-users and/or the market),
- Complete ban on marketing of the product,
- Destruction of the product,
- Revocation of the CE Marking.
The professionalism and expertise of the appointed Authorized Representative in dealing with various Competent Authorities and handling post-market surveillance case play a vital role in the successful recovery of your brand in the EU Market.
Sign-up for our email list to stay up-to-date on legislation changes and EMC related matters in the EU Market!